This catcher is intended for use by professional landscape personnel who have been trained in proper mower safety techniques and are physically capable of lifting heavy objects.

Installation :

To install our catcher you will need to attach the aluminum angle bar to the edge of the deck so the catcher has a place to hook on. The side of the angle bar with the hole should be vertical and flush with the edge of the deck just above the discharge. Clamp the angle bar down with a C clamp or vise grip, and drill 2 holes through the aluminum angle bar and the mower deck. Space the holes at least 4 inches apart. Use the nuts and bolts supplied to attach the angle bar to the mower deck.
If you need technical assistance, call us at 1-800-984-9410 (we are on pacific time).

See the regular instructions for general catcher information.

Please the General Instructions for my information about installation and use of your catcher.

Clean bag out at the end of each work day (especially if you have been mowing wet grass). The bag will clean easily with a hose or an air compressor. Be sure to wear eye protection especially if you are cleaning the bag with an air gun or hose. Do not put your hands inside the catcher- there are some surfaces that can cause abrasions or cuts. Never use excessive pressure or force when cleaning the bag as this may damage the bag and/or injure you.
• Never throw the catcher when full of grass. It is very heavy when full, and the impact may cause damage to the frame.
• Be sure to secure the catcher to your truck or it may fly out while driving.