This is a supplement to the general instruction manual. Please read those instructions for more information about the installation, care, and safety of your new Accelerator catcher.
The picture to the right shows a toro superflow deck without the hole pre-drilled by the factory. In this case you will have to drill a hole before mounting your catcher. To get the correct placement for your hole, place the catcher next to the mower like you were mounting it. Mark the placement of the hole with a sharpy pen. Use a 7/16” drill bit to drill the hole, being careful to keep the drill straight and even.
above is a picture of the new turbo force deck. You do not need to drill a hole in this deck. just place the pin in the hole and the hook over the lip and you are ready to go. See the image to the right.
info@acceleratorindustries.com