|
|---|
Models for Cub Cadet®
To Find your part #
Click here to be directed to our parts lookup.
 |
On the left is a picture of the opening on a Cub Cadet Commercial Mower. The bracket that comes with the catcher will be mounted along the mouth.
Look Further down this page for a picture showing a cub cadet our catchers will not fit. |
|---|---|
|
The Picture on the left is of the GCSCVXL mounted on a Cub Cadet 50" Zforce Rider. |
| The picture to the right is of a bracket mounted on the 50" Zforce Rider. We don't have any pictures of the catcher mounted on the Cub Cadet Commercial, but the bracket would be mounted similarly to the deck shown. The bracket shown, is for the 2005 and newer catchers. If you have a catcher that comes with different type of bracket Click HERE. With the new and simpler design there are two bolts to install and once installed, you put the catcher pin into the hole and place the hook over the lip on the bracket and off you go. For more installation information go to: Mounting instructions. |  |
 |
If you have a deck with a cut out like in the picture to the left, our catchers will not fit your mower.
(This is a picture of the opening on 44" Zforce. There may be other mowers in the cub cadet line with the same kind of cut out.) |
Last revised: June 8, 2011.
