Excel Hustler

Home. About Accelerator . Where can you get a catcher .Application Chart/Model Listing . Mounting Instructions .Contact us . . Sitemap

	Model for Excel Hustler® An XL Catcher Shown on a 2005 72" Hustler Super Z. See the bottom of this page for more pictures of the catcher on the 72" Super Z.
Our Thanks to John Stark, Stark's Landscaping of Akron PA for this great picture, and the pictures on the bottom chart.

Model for

Excel Hustler®

An XL Catcher Shown on a 2005 72" Hustler Super Z.

See the bottom of this page for more pictures of the catcher on the 72" Super Z.

Our Thanks to John Stark, Stark's Landscaping of Akron PA for this great picture, and the pictures on the bottom chart.

Excel Hustler has many different deck models so see the chart below to find your specific model and Part number. look closely at the picture of the opening to make sure you have the correct deck. Below this chart are more pictures to help clarify which catcher you need.
Mower Models	Picture of Deck Opening - please look carefully for your type. click on picture to enlarge	Part number for 4.15 cubic ft models	Part number for 6.2 cubic ft XL models
Mini FasTrac 36" & 42" DECKS Instructions		Part # GCFT36	Not Available in xl size
2006 MINI Z 36, 42" and 52" Decks Also fits: 2006 And Later 44 And 52" Fastrac		Part # GCDN	Part # GCDNXL
Older FASTRAC MINI Z AND SUPERMINI Z 44 & 52" DECKS note the smaller opening Instructions		Part # GCFT	Part # GCFTXL
SUPER Z 52" DECKS , 37,48 & 54",60" WALK BEHIND Decks, Instructions	or For more info on 37" deck CLICK HERE.	Part # GCHU05	Part # GCHU05xl
HUSTLER 2005 Super Z 72" Decks Instructions	this picture is not clickable. See the last chart below for more pictures.	Not Available	Part # GCHU72XL
TRIMSTAR BELT DRIVE 32",36",48" DECKS Instructions		Part # GCEX	Part # GCEXXL Also: For the 3.3 cubic ft catcher use part number: GCEXSM
TRIMSTAR 48" COMMERCIAL DECK Instructions		Part # GCDN	Part # GCDNXL
XR7 Decks and 2005 and Later 60" Super Z Instructions	see the first set of pictures in the chart below for pics on the super Z.	Part # GCHU60	Part # GCHU60XL
Now available catcher for 2007 Hustler 48 & 54 2007 Fastrac Model #s 928275,928267,928520, 928291,928502	click on picture to enlarge	Part # GCFT4807	Part # GCFT4807XL

The pictures above show the GCHU60XL Mounted on a Hustler Super Z mower. You can't see the opening very well, but this cathcer is only used on the 2005 and later Super Z 60" Decks.

Thanks to Jay Martz for these great pictures.

Pictures on the Hustler Super Z with a 72" Deck (Part Number GCHU72XL)

The pin on this catcher fits into the hole you drill into the deck. then the hook fits over the lip alton the edge of the mouth.	You need to drill a hole along the lip of this deck for the pin on the catcher to fit into. Please see the general instructions for hole placement.

Pictures on the Hustler Super Z with a 72" Deck

(Part Number GCHU72XL)

The pin on this catcher fits into the hole you drill into the deck. then the hook fits over the lip alton the edge of the mouth.

You need to drill a hole along the lip of this deck for the pin on the catcher to fit into. Please see the general instructions for hole placement.

FOR MORE INFORMATION OR ANY QUESTIONS CALL:

1-800-984-9410 / 425-562-3013 or email: info@acceleratorindustries.com

Home. About Accelerator . Where can you get a catcher .Application Chart/Model Listing . Mounting Instructions .Contact us . . Sitemap