Gravely

GRAVELY® Mower Decks

Models Gravely Catchers	4.15 cubic ft catcher	6.2 cubic ft catcher
Gravely ZT decks - 1534ZT, 2044ZT, 2148ZT (Does not fit 40" decks), Old ProMaster 50 XDZ 60 and 66" Decks	Part # GCJD36	Part # GCJD36XL
2002 AND NEWER PRO G AND PRO H decks through 52", and 44" Z Riders	Part #GCGR	Part#GCGRXL
GRAVELY 160Z, 260Z 60" decks, 48" Deck 148Z RIDERS,72" 272Z Rider 60" 260M, 260H, & 2760HD Riders		Part # GCGR60ZXL
GRAVELY - Z Rider and all 34" Red decks	Part # GCGR34Z	Part # GCGR34ZXL
GRAVELY Pro Stance Stand on Units Model 1948 FL 48" Decks	Part # GCDN4805	Part # GCDN4805XL
GRAVELY Pro Stance Stand on Units Model 1952 FX 52" Decks	GCDN or	Part # GCDNXL
GRAVELY Pro Stance Stand on Units	Part # GCEX44
Gravely 148 XDZ deck Click here for view of opening on the 148 XDZ deck	Part # GCGR34Z	Part # GCGR34ZXL
Gravely 250Z, Gravely ZT 2348XL	Part # GCZD34

	The the picture to the left and the following 3 pictures show the GCGR catcher mounted on a Gravely 44" Z Deck. Click Here For View on Gravely Z34 Click Here For View on Gravely 260Z

The picture below show the measurements on the 2005 44"Z Gravely deck . As you can see from the picture, it has a hole already punched into the deck which is used when mounting our catcher. We have given several important measurements in this picture since Gravely has a variety of decks and some have been changing. If your deck has the same measurements as shown below, then the GCGR or GCGRXL will fit your mower. If they are slightly different, give us a call and we can discuss how to fit up a catcher. In spring 2005 Accelerator changed the pin setup for the GCGR catchers. This catcher has a pin and hook attatchment. You will need to enlarge the hole show above for the pin to fit into. (see picture above) If your deck does not have a hole, you can drill one using a drill bit. (see instructions for further information.)

The the picture to the left and the following 3 pictures show the GCGR catcher mounted on a Gravely 44" Z Deck.

Click Here For View on Gravely Z34

Click Here For View on Gravely 260Z

The picture below show the measurements on the 2005 44"Z Gravely deck . As you can see from the picture, it has a hole already punched into the deck which is used when mounting our catcher. We have given several important measurements in this picture since Gravely has a variety of decks and some have been changing. If your deck has the same measurements as shown below, then the GCGR or GCGRXL will fit your mower. If they are slightly different, give us a call and we can discuss how to fit up a catcher.

In spring 2005 Accelerator changed the pin setup for the GCGR catchers. This catcher has a pin and hook attatchment. You will need to enlarge the hole show above for the pin to fit into. (see picture above) If your deck does not have a hole, you can drill one using a drill bit. (see instructions for further information.)

Model for Gravely® Z34
	New in 2004, Accelerator offers the catcher for the Gravely Z34 which is shown in the picture on the left.
Below see a front view of the catcher mounted on Z34.	Below see a top view of the bracket (Shown on ferris but same type of mounting)

Model for Gravely® 260Z Part Number GCGR60ZXL will fit this Mower

the GCGR60Zxl catcher on a Gravely 260Z Mower.	Place the bracket along the edge of the mouth as show above.

Above see the rear view on the 260Z.	Another view of the bracket.
Our thanks to Doug Killion for these Great pictures on his Gravely 260Z.