Snapper

Models for Snapper ®
2008 SNAPPER MIDSIZE 36" and up.	Part # GCSC for standard 4.15 cubic ft size Part # GCSCXL for Extra Large 6.2 cubic ft size	Instructions
2007 AND BEFORE SNAPPER MIDSIZE 36" and up.	Part # GCDN for standard 4.15 cubic ft size Part # GCDNXL for Extra Large 6.2 cubic ft size	Instructions
PRO 32" DECK	Part # GCGR34Z for the for standard 4.15 cubic ft size Not available in the XL model	Instructions

Our Thanks to Tommy Steele of Hampton GA, for these awesome pictures.

This picture shows the GCDN on a 36" Snapper Pro Series Deck	Here is a view from the top showing the catcher on a 36" Deck.	This is a front view on the 36" deck.

In this picture notice how the pin goes into the the hole on the lip, and the hook goes over the lip. This means no brackets are necessary.	This picture shows the opening on the newer Snapper Pro series decks. Note the curvature on the rear part of the opening. The older Snapper mowers have a flush opening (No curvature at the back).	Here is a view from the back showing the catcher flush up against the deck

This picture shows the same catcher on a 48" Snapper	Here is a closer view of how it fits on the 48" snapper	Side view on a 48" Snapper Pro Deck

If your Snapper is like the one shown below we don't have a catcher available for your mower.